0. Introduction
SGLI Standard Monitor is a web page that uses standard data observed by GCOM-C/SGLI to display images of physical quantities projected on a map in a calendar format.
In addition to display the images on the web, you can download the data shown in "2. About Data".
1. Web page
Please refer to the following for the operation of SGLI Standard Monitor. How to Use JASMES SGLI Standard monitor
2. About Data
GCOM-C/SGLI Standard data (JASMES format) is netCDF4 format data, which is resampled GCOM-C/SGLI Standard product (HDF5 format) on the JASMES grid.
For details, please refer to the following.
About JASMES SGLI Standard data
For more information on SGLI Standard Product & Algorithms, please refer to the following.
SGLI Standard Product & Algorithms
2-1. Area and resolution
The target areas are Global, Japan, Polar(north and south). The area and resolution are as follows.
Global・Japan
| Area | Pixel size | Latitude and Longitude (pixel center value) |
|---|---|---|
| Global | 0.05deg | Lon:0.0deg.E, Lat:90.0deg.N |
| Lon:359.95deg.E (-0.05deg.W), Lat:90.0deg.S | ||
| Japan | 0.0025deg | Lon:123.00125deg.E, Lat:49.99875deg.N |
| Lon:149.99875deg.E, Lat:24.00125deg.N |
Polar Stereo
Latitude and Longitude information at each pixel is stored in netCDF.
| Area | Pixel size | Latitude and Longitude (pixel center value) |
|---|---|---|
| Polar(North) | (See netCDF) | Lon:-135.0deg, Lat:+6.032568deg |
| Lon:+45.0deg, Lat:+6.032568deg | ||
| Polar(South) | (See netCDF) | Lon:-45.0deg, Lat:-6.032568deg |
| Lon:+135.0deg, Lat:-6.032568deg |
2-2. Product
Whether data can display on monitor page and be provided depends on the physical quantity.
For details, please refer to the JASMES SGLI Standard monitor Data list.
JASMES SGLI Standard monitor Data list
2-3. Use of Data
JASMES User Registration is required to use observation data.
Please also refer to "Terms of Use of Research Data (JAXA)".
JASMES User Registration
Terms of Use of Research Data (JAXA)
3. FAQ
Regarding the use of JASMES-related Web pages/data, including SGLI Standard monitor, the following is list of frequently asked questions and answers. Please check the following FAQ before asking questions.
if your question is not resolved, please contact the listed in the "Contact" section.
JASMES FAQ
4. How to use data
4-1. View Data
・View JASMES SGLI Near-realtime data in SeaDAS
See below for instructions on how to use SeaDAS to read and display netCDF data.
View JASMES SGLI Near-realtime data in SeaDAS
4-2. Convert to GeoTiFF
・How to convert JASMES GCOM-C/SGLI data to GeoTiFF
This is tutoial for converting GCOM-C/SGLI data in netCDF format to GeoTiFF.
The script in the tutorial will use Python3(netCDF4, NumPy, GDAL library).
In addition, software (SeaDAS、ncdump, etc.) to check the contents of netCDF is required.
5. Contact
If you have any comment or questions about JASMES services, please contact us at the address below.
<Contact>
Earth Observation Research Center / JAXA
GCOM Secretariat(formerly ADEOS/OCEAN Secretariat)
2-1-1 Sengen, Tsukuba, Ibaraki 305-8505 Japan
FAX: +81-29-868-2961
E-mail: 