Pi-SAR L-band Characteristics |
Center frequency |
1.27149 GHz |
Band width |
<= 50 MHz |
Polarization |
mode 1 HH or VV mode 2 HH, HV, VH, VV |
Phase accuracy |
<= 5 deg. (after correction) |
Off nadir angle |
40 deg. |
Imaging swath |
>= 16 km at 12 km of cruising altitude |
Resolution |
Range direction |
3, 5, 10, 20 m (at 60 deg. of incidence angle) |
Azimuth direction |
3 m at three looks processing |
Noise equivalent sigma zero |
- 30 dB at SNR = 10 dB |
S/A |
>= 30 dB at off nadir of 20 - 60 deg. |
Calibration accuracy |
0.6 dB |
Pulse duration |
10 micro sec. (nominal) |
PRF |
variable and <= 1 KHz |
Data |
ADC 6bit |
8 bit / I and Q channel |
Data rate |
256 Mbps |
Power |
<= 3.5 KW |
Total weight |
450 kg |
Antenna |
Gain |
>= 18 dB |
Beam width |
38 +- 4 degree in elevation 9.8 +- 1.0 degree in azimuth |
Sidelobe |
< -20 dB in elevation < -25 dB in azimuth |
Cross pol. |
< -25 dB |
Dimension |
1.7 m x 0.6 m |
Transmission receiver subsystem transmission pulse |
Duration |
10 micro sec +- 0.1 micro sec. |
Chirp band width |
50, 45, 22.5, 11.3 MHz |
Peak power |
3 KW |
Noise figure |
< 1.5 dB |
Signal processor |
Sampling frequency |
61.7 MHz / 30.9 MHz |
Data recorder |
Media |
D-1 cassette (L size) |
Data rate |
max. 32 MByte/sec. |
Data capacity |
96 GByte |